Metrohm tiamo 2.3 (process analysis) - Manual (Page 51)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 General program functions
tiamo 2.3 (for Process Analysis) ￭￭￭￭￭￭￭￭ 35
syntax from the sample data variables of the current sample data line by
means of the word NEXT. The data type (Text, Number or Date/Time)
depends on the variable.
You can select the method variables directly in the formula editor under
Variables
▶ Method Variables ▶ NEXT in order to avoid syntax errors.
Method variables
Variable name Description Data type
.VAL Value of the method variable
(optional, i.e. 'MV.NEXT.Fac-
tor' = MV.NEXT.Factor.VAL')
(Text, Number or Date/Time) Text, number
or date/time
.OVF Exceeding limits for method vari-
able (Number: 1 = limit
exceeded, 0 = limit not
exceeded) Number
In the following lines you will find the method variables (sample data)
present in the default settings which appear in the Workplace and
which can be edited and deleted in the START command of the corre-
sponding method.
Sample size.VAL Value of 'Sample size' Number
Sample size.OVF Exceeding limit for 'sample size' Number
Unit.VAL Value of 'Unit' Text
Unit.OVF Exceeding limit for 'unit' Number
Sample posi-
tion.VAL Value of 'Sample position' Number
Sample posi-
tion.OVF Exceeding limit for 'sample posi-
tion' Number
ID1 (…3).VAL Value of 'ID1…3' Text
ID1 (…3).OVF Exceeding limit for 'ID…3' Number