FUJITSU F2MCTM-16LX - Manual (Page 20)

4
CHAPTER 1 OVERVIEW
●
Delayed interrupt generation module
Generates interrupt request for task switching
●
8-/10-bit A/D converter: 16 channels
• 8-bit and 10-bit resolutions
• Start by external trigger input
• Conversion time: 3
µs (including sampling time at 24-MHz machine clock frequency)
●
Program patch function
Detects address match for six address pointers
●
Low voltage/CPU operation detection reset function (product with T-suffix)
• Detects low voltage (4.0 V
± 0.3 V) and reset automatically
• Automatic reset when program runs away and counter is not cleared within internal time (approx. 262
ms @ 4 MHz external)
●
Clock supervisor (MB90x367x only)
●
Changeable port input voltage level
Automotive input level/CMOS Schmitt input level (initial value in single-chip mode is Automotive level)
●
ROM security function
Capable of protecting the content of ROM (MASK ROM product only)
*: Controller Area Network (CAN) - License of Robert Bosch GmbH