Grass Valley Kalypso User Manual V.15.0 - Manual (Page 50)

50 Kalypso — User Manual
Section 1 — System Overview
Kalypso Video Processor Power Supply
A separate Video Processor Power Supply provides power to the Kalypso
Video Processor. The Video Processor Power Supply frame holds up to
three Video Processor Power Supply modules (
Figure 37 ). Two modules are
required for system operation. The third module is an optional backup.
Power supply modules can be installed in any slot in the Video Processor
Power Supply frame.
Figure 37. Kalypso Video Processor Power Supply, Front View
Power connectors are located on the rear of the Video Processor Power
Supply (
Figure 38 ), including a special connector for feeding power to the
Video Processor. Each module has its own power connection. Though not
required, we recommend each module be plugged into a separate AC cir-
cuit.
Figure 38. Kalypso Video Processor Power Supply, Rear View
8218_06_15_r0
Power Supply Modules (3)
2 Standard, 1 Option
Power Supply
Locking Screw(s)
J3PS3 J2PS2 J1PS1
8218_06_16_
r0 DC OUTPUT
A1 A2 A3
J10
DC Output to Video Processor Frame AC Power (3)
Chassis
Grounding Lug