Grass Valley Kalypso User Manual V.15.0 - Manual (Page 423)

Kalypso — User Manual 423
Basic Keyframe Effect Tutorial
Inserting New Keyframes
1. Press Go To KF , 1 , Enter in the Master E-MEM subpanel to go to the first
keyframe in the effect. When the Go To KF button is illuminated the
Master E-MEM readout reports the keyframe number of the cursor
location. In this mode, E-MEM recall and learn operations on the
keypad are disabled. Pressing the illuminated
Go To KF button turns the
mode off.
2. Move the box down to the lower left corner of the screen ( Figure 292 ).
Figure 292.
3. Press Insert After . A new keyframe is inserted after KF 1’s duration (one
second). The new keyframe is called KF 2 (and is reported in the
readout) and has the same duration as KF 1. The last KF is now called
KF 3, instead of KF 2. This action is called inserting on a keyframe.
4. Press Rew to rewind to the beginning of the effect.
0721_04_19_r0