Grass Valley Kalypso User Manual V.15.0 - Manual (Page 185)

Kalypso — User Manual 185
E-MEM Operations
to keyframe, the value will change to reflect the duration of the keyframe
where the cursor is located. When the cursor is moved between keyframes,
the duration shown is the distance from the current time to the next num-
bered Master Timeline keyframe. The time value displayed is used by
default when a new keyframe is inserted into an effect.
Changing the Duration of a New Keyframe
The value for a new keyframe’s duration may be set from the keypad. For
example, the following procedure was used for
Figure 150 .
1. Move the edit cursor to the desired location in the effect, in this case on
the path midway through a one second keyframe.
1. Press KF Dur so the button is lit.
2. Type a 1.0 duration value on the keypad and press Enter to change the
value displayed on the readout.
Note Pressing the Trim button will increase or decrease the duration value by the
amount specified.
3. Press Insert Before or Insert After to insert the new keyframe with the
specified duration.
Figure 150. Insert KF with Duration Specified
1 2 3 4
0.00 1.00 1.15 3.00
3 4 5
0.15 3.00 1.15 3.15
1 2
0.00
Insert,
With 1 Second KF Duration Entered
KF Dur 0.15
Edit Cursor On Path
0618_04_136_r0
New
Keyframe
New
Keyframe Duration 1.00
Effect Duration Increased