Grass Valley Kalypso User Manual V.15.0 - Manual (Page 176)

176 Kalypso — User Manual
Section 3 — System Operation
Mix Through Video Transition
One common application of a Mix Through Video transition is to add a
white flash to simulate a photographer’s flashbulb. To set up a simple
white flash effect do the following:
1. Go to the User Transition menu by double pressing the User Transition
button (
User 1 , User 2 , or User 3 ) on the M/E you wish to program. The
User Transition menu will automatically be delegated to that function
on that M/E.
2. Select the Edit Matte button in the Intermediate Video Source data pad to
bring up the M/E Matte menu for the M/E you have selected
3. In the M/E Matte menu, select the Matte button in the Source pane in the
Base Color pane.
4. Set the Brightness to 100% and the Saturation to 0% with either the soft
knobs or the popup keypad to create a white matte. The matte will
appear in the Base Color box.
5. Return to the User Transition menu by touching the Last Menu button.
6. In the M/E menu, touch the Full Screen button in the Intermediate Video
Appears pane to create a full raster effect.