Grass Valley Kalypso User Manual V.15.0 - Manual (Page 426)

426 Kalypso — User Manual
Appendix A — Tutorials
10. Press Go To Time , 1 , •, 15 , Enter in the Master E-MEM subpanel. This
moves to a point in time one and a half seconds into the effect, half way
between KF 2 and KF 3. The box should be near the center of the screen
(
Figure 297 ).
Figure 297.
11. Press Go To Time to turn off time entry mode and return the keypad to
normal operation. When the button is illuminated the Master E-MEM
readout reports the effect time of the cursor location and E-MEM recall
and learn operations on the keypad are disabled.
12. Press Insert After . A new keyframe (called KF 3) is inserted at that point
in time between keyframes, with a duration that reaches to the next
keyframe (now called KF 4). The new keyframe’s duration is one half
second, and the duration of KF 2 has been reduced to one half second.
This action is called inserting on the path. Note that the
Insert Before and
Mod buttons can also be used to insert on the path and will produce the
same result.
0721_04_23_r0