Grass Valley Kalypso User Manual V.15.0 - Manual (Page 384)

384 Kalypso — User Manual
Appendix A — Tutorials
cating it is being output. The button tally for Black on that bus will go
off. This is a hot cut to a new source, without a preview. The PGM PST
M/E status display will report
for background bus A and Black
for the other buses.
3. Press Pgm Pst on the Preview subpanel above the PGM PST bank
( Figure 257 ). This makes the switched preview monitor display the
PGM PST preview output, which is currently Black.
Figure 257. Preview Subpanel
4. Press the button on the PGM PST B bus. That source will appear
on the preview monitor. Its source button will go low tally, indicating it
has only been selected. The M/E status display will report
for
background bus B, with still reported for background bus A.
This selects the next source to be used for a transition, and the end result
of the transition appears on the preview monitor.
0618_02_104_r0
Preview
Still till
Store Store
M/E M/E
1
M/E M/E
2
M/E M/E
3
Alt Alt
PVW
PVW
PVW PVW
Pri
Pri
Pgm Pgm
Pst
Pst
Preview
Subpanel
Pgm
Pst