Grass Valley Kalypso User Manual V.15.0 - Manual (Page 240)

240 Kalypso — User Manual
Section 3 — System Operation
Clip Directory (AMP Protocol)
On the External Device Control menu, touching a Preset Clip or Program Clip
data pad brings up a menu from which you can select the desired folder
and then choose a clip in that folder to load for playback (
Figure 182 ). A
similar menu is used with the Clip Browser on the External Device Event
List menu, and for loading clips in the Timeline Events menu.
The Kalypso Machine Control subpanel always shows the clip list of the
last selected folder. If you change a clip locally on the Profile DDR, that clip
name will be updated on the Kalypso External Device menus. If the folder
list or clip list are incomplete, re-enabling the device will fetch the entire
folder and clip list.
Note Do not create file or folder names that have the pound character ( # ) along
with either the dash ( - ) or underscore ( _ ) character, and avoid blank spaces
(for example, use “DeadEnd” not “Dead End”. This can inhibit clip access.
Note A maximum of 20 folders is recommended along with a maximum of 20 clips
per folder.
Figure 182. Folder and Clip Selection Menu