Grass Valley Kalypso User Manual V.15.0 - Manual (Page 356)

356 Kalypso — User Manual
Section 3 — System Operation
select button row on any M/E can be delegated for macro operations. This
is accomplished by holding down the
Macro Deleg button and pressing any
keyer source select button on the desired row of the desired M/E. Macro
names, when displayed, will also appear on this M/E.
Pressing Show Macro when macro mode is on displays the names of existing
macros on the M/E delegated for macros. Holding down the Shift button
while in this mode displays the shifted macro names.
The Rec button activates or terminates macro Record mode. In this mode,
you select the macro register into which you wish to record, using the del-
egated keyer row, perform the desired actions, and then finish the
recording by either pressing the
Rec button again or pressing the macro reg-
ister button.
During a macro recording, time delays can be inserted into macros. The
Insert Delay button activates macro Insert Delay mode. In this mode the
macro delegated M/E’s source name displays show time durations which
can be selected by pressing the corresponding keyer buttons.
The Delete button activates macro Delete mode. When delete mode is on,
pressing a macro button deletes the macro associated with that button.
When macro mode is on, pressing a Pre Attach , Post Attach , or Repl Attach
button activates attach mode. You then select the macro register of the
desired macro and press the button to which you wish to attach that macro.
The Show Attach button activates a mode that low tally blinks panel buttons
that have macros attached.
The Attach Enable button enables and disables all macro button attachments
globally. When on, pressing panel buttons with macros attached will run
those macros. When off, macros are only be played back by activating
macro mode and pressing the macro register buttons, or with the Macro
menu.
Macro Alternate Buttons
The PGM PST K1/K3 M/E re-entry buttons (the default macro row) are
labeled with additional macro capabilities (
Figure 238 ). When macro dele-
gation is on, holding down one of these buttons momentarily activates Rec,
Delay, or Delete macro mode. The functions of these alternate buttons
follows to the keyer row and M/E delegated for macro operations.
Figure 238. PGM PST Macro Alternate Buttons
K4
K2
K3
K1
0721_15_01_
r0
M/E M/E 1
Rec Rec
M/E M/E 2
Delay Delay
M/E 3 M/E 3
Delete Delete
M/E M/E M/E M/E M/E M/E
Maco
Shortcut
Buttons (3)