Grass Valley Kalypso User Manual V.15.0 - Manual (Page 130)

130 Kalypso — User Manual
Section 3 — System Operation
Source Select Bus Delegation
Source selection button rows can be delegated to control different source
buses using the source select modifier buttons. For example, holding down
the
Alt button allows selection of Keyer 3 and Keyer 4 sources using the two
rows of keyer buttons available on the Main panel.
DPOP and SPOP Menu Delegation
DPOP stands for Double Press Open. This is a form of automatic delegation
where a specific menu is displayed on the Menu panel when a panel button
is pressed twice in rapid succession. A menu can contain controls that do
not exist on the Main panel. DPOP makes these additional menu controls
readily available. If further delegation exists within the menu, for example
to a specific keyer, that delegation occurs as well. If the menu is already
open, a single press performs the menu delegation (a second button press
is not required).
SPOP stands for Single Press Open. SPOP buttons operate similar to DPOP,
but only a single button press is required.
Active DPOP and SPOP buttons and their menus are listed in Table 3 .
Table 3. DPOP and SPOP Buttons
DPOP Button Subpanel Menu Displayed
Unshift, Shift All M/E source select modifiers Shift Preference menu
Wipe 1, Wipe 2 M/E Transition, Mattes subpanels
Wipe menu
C1 Wipe, C2 Wipe, Keyer Wipe Mattes, Masks, Transform subpanels
Bkgd 1, 2 Mattes subpanel Matte menu
Key 1, 2, 3, 4 Mattes subpanel Matte menu
selected keyer delegated
M/E 1, 2, 3, Pgm Pst Mattes subpanel Matte menu
selected M/E delegated
Borderline, Pst Pts Bord, Matte Fill Mattes subpanel Matte menu
Chr Key
Keyers subpanel
Keyer Chroma Key menu
Pst Ptn Wipe menu
Key 1, 2, 3, 4 Keyer menu
selected keyer delegated
M/E 1, 2, 3, Pgm Pst Keyer menu,
selected M/E delegated
Current Prior, Next Prior Keyer menu, Priority
Router Assign PGM PST bank Router Select menu