Grass Valley Kalypso User Manual V.15.0 - Manual (Page 259)

Kalypso — User Manual 259
Router Interface Operation
R-MEM Menu Operation
R-MEM registers are learned, recalled, and previewed from the R-MEM
menu. The R-MEM menu is accessed by pressing the
R-MEM Menu panel
button, then touching the R-MEM category selection button ( Figure 190 ).
Figure 190. R-MEM Menu
The R-MEM menu has a mode pane on the upper left, a pane in the center
listing the R-MEM registers available (the full register number is displayed
on each register button), and a Router pane on the right showing the
switcher sources, router sources and destinations, and protection status.
Switcher sources configured as routed Kalypso sources appear in the right
pane.
R-MEM Auto Recall
The R-MEM Auto Recall mode acts similar to the E-MEM Auto Recall. An
R-MEM Auto Recall automatically changes only the switcher sources that
were enabled when the register was learned.
Preview
When Preview mode is turned on, recalling a register will only display the
R-MEM settings stored in that register. No switcher sources will change.
This allows you to see what switcher sources will be affected by a register
recall, and what the router sources and destinations will be after the recall.