Grass Valley Kalypso User Manual V.15.0 - Manual (Page 169)

Kalypso — User Manual 169
File Operations
Saving and loading E-MEMs is similar to the file operations described
above, except you can choose to save or load all the current E-MEMS, a
range of E-MEMs, or a single E-MEM file.
E-MEM files are named by their bank and register number. For example,
the filename for E-MEM register 5 in Bank 2 would appear as EMEM25. File
names consist of the bank and register appended with .GVR. It is important
that these files retain these names, as the number determines which register
will receive the data when files are loaded. In fact, E-MEM files saved
locally to the Frame:C drive cannot be renamed. If you try to rename an E-
MEM file on the Frame:C drive an error message will appear in the message
area. If for some reason an E-MEM file needs to be renamed, copy it to a
local drive and rename it.
Saving E-MEMs
Save All E-MEMs
1. Go the E-MEM Save-Load Menu.
2. Navigate to the desired destination directory and/or create a new
folder for the file using the buttons in the upper right.
3. Touch the All button, then touch the Save button.
All 100 registers will be saved into the directory named in the Target Loca-
tion data pad.
Save E-MEM Range
1. Go the E-MEM Save-Load Menu.
2. Navigate to the desired destination directory and/or create a new
folder for the file using the buttons in the upper right.