Grass Valley Kalypso User Manual V.15.0 - Manual (Page 330)

330 Kalypso — User Manual
Section 3 — System Operation
The M/E and Pgm Pst data pads display the current partition control
parameters for that element. On a new Kalypso system the default settings
assigns the partition boundary to the Primary partition level, and has the
Secondary partition unattached (set to
None ) as shown in Figure 227 .
Touching the data pad of an M/E brings up a menu used to assign the par-
tition boundary and the Secondary partition itself to E-MEM levels (see
Figure 228 ).
Figure 228. E-MEM Levels Menu
Touching the Partition Boundary or Sec Level Attachment data pad and
then touching one of the Level buttons assigns that element to that level.
Partition Boundary Assignment
The partition boundary information can be assigned to an E-MEM level, or
not be assigned (None). Which level the partition boundary is associated