Grass Valley Kalypso User Manual V.15.0 - Manual (Page 345)

Kalypso — User Manual 345
Resource Sharing
3. Continue specifying only the desired logical devices, then touch
Release Undesired to free unwanted resources, and touch Acquire Desired to
acquire only those resources ( Figure 235 ). The other resources will be
available for use by the other suite.
Figure 235. Acquire Resources Menu Example
4. A message will appear if all the desired resources could not be
acquired. If this occurs, scroll through the list on the left to identify the
missing resources. Desired devices that are not acquired are colored
red. To resolve the problem, you can contact the other suite and ask to
have those resources released, or if a resource isn’t really needed you
can mark it as undesired.
5. Make any other necessary adjustments to the remaining Suite Prefs for
Suite 1. No changes may be required, since these settings are the same
as were set previously in single suite mode. However, this may not be
the case. For example, you may want to set source patching to unity
with no logical names or nicknames, so that all sources are initially
named the same.
6. Save this Suite Pref to disk, being sure to name the file so you can
identify it is for Suite 1. Note that the desired resource list is saved. The
actual current acquisitions are not saved as part of a configuration file,
but are non-volatile and are restored after reset.