Grass Valley Kalypso User Manual V.15.0 - Manual (Page 302)

302 Kalypso — User Manual
Section 3 — System Operation
Adding an Image Server
Image Servers can be added from the Image Manager menu, by selecting
the
Server Setup button in the View/Add Image Servers pane, see Figure 202,
middle right of menu.
1. Select the Server Setup button in the Image Manager menu, see
Figure 202 on page 286 .
2. Enter the Name , IP Address , and Port of the image server to be added, see
Figure 217 .
3. Select the Add button.
Figure 217. Still Store—Adding an Image Server
Input Source Selection
Still Store input sources can be selected using the Local Aux panel or from
the Input Source menu, top center of Playback screen (see the Kalypso User
Manual for more information).
1. Select a Still Store output on the Still Store menu.
2. Turn on monitoring.
3. Press the Still Store bus delegation button on the Local Aux panel.