Grass Valley Kalypso User Manual V.15.0 - Manual (Page 325)

Kalypso — User Manual 325
DoubleTake Option Operation
Split Mode
The M/E Mode menu is used to activate Split Mode on an M/E and assign
resources to the partitions. Touch
M/E , Mode to access the menu, then select
the desired M/E and touch Split to partition that M/E ( Figure 226 ).
Figure 226. M/E Mode Menu, Split M/E Selected
In Split operating mode, the M/E is divided into Primary and Secondary
partitions. The Primary partition has the Pgm A and Pgm C outputs that
use the Background A and B buses, and the Secondary output has the Pgm
B and D outputs that use the Utility buses. The Pgm Out columns on the
menu are re-arranged when Split mode is selected to show the A and C
Primary outputs on the left and the B and D Secondary outputs on the right.
The Secondary Assign pane is used to assign Keyers and Complex Wipe
generators to the Secondary partition. Assignments made here affect what
elements are learned and recalled by the E-MEM levels (see Split M/Es and
E-MEM Control
on page 328 ). Touching an item so its yellow indicator illu-
minates assigns it to the Secondary partition. The buttons for these items
are then activated on the Secondary partition outputs. Unselected items
remain assigned to the Primary partition. Note that keyers can be activated
or deactivated (green button indicators on or off) on the individual outputs
if desired, the same as in Programmable Clean Feed mode.