Grass Valley Kalypso User Manual V.15.0 - Manual (Page 398)

398 Kalypso — User Manual
Appendix A — Tutorials
Basic Keying
In this exercise you will perform a Fixed and Adjustable Linear Key and a
Luminance Key (see
page 215 for Chroma Key procedures). It is assumed
you understand clip and gain key controls. For background information
about keys, see Keying
on page 79 .
1. Set up the switcher.
• If you just completed the exercise above, go to Step 2 . below.
• If you completed the exercise above previously, make sure the
Auto Recall button in the Master E-MEM subpanel is illuminated and
press Bank 9 , 9 to recall register 99 to clear the system. Then press 0 to
recall the ending point of the first exercise. If this doesn’t return the
system to it’s previous state, the registers were overwritten. Load
the effects from removable media (see
page 382 ) and then recall
them.
• If you haven’t done either of the above, set up the switcher manu-
ally to the following state:
on the PGM PST A bus, on PGM PST B bus. Delegate
only Pgm Ps t in the Master E-MEM subpanel.
2. Select Pgm Pst on the Preview subpanel, if necessary.