Grass Valley Kalypso User Manual V.15.0 - Manual (Page 292)

292 Kalypso — User Manual
Section 3 — System Operation
The current state of the Image Manager is saved in the NVRAM and will be
restored after a reboot. This state includes an image whether or not it was
in cache. This allows the operator to reload the cache to its pre-shutdown
state.
Show Uncached Button
Selecting the Show Uncached button:
Selecting the Show Uncached button filters the Image Manager scrolling list to
show only images that are not in cache.
The Unload section of the Load/Unload Cache pane contains three over-
ride buttons:
Output , User Locked , and Unsaved Image , a selection button for the
overrides titled Unload Selected , and a Show Cache button.
Unload
Unload Selected Button
Selecting the Unload Selected button unloads all selected images from cache.
Show Cache Button
Selecting the Show Cache button filters the Image Manager scrolling list to
show only “cached” images.
Override Filter
Output Button
Selecting the Output button overrides the auto locks on images in output so
they can be unloaded from cache.
User Locked Button
Selecting the User Locked button overrides user locks on images in cache so
they can be unloaded from cache.
Unsaved Image Button
Selecting the Unsaved Image button overrides locks on unsaved captured
images in cache so they can be unloaded from cache.
CAUTION If an unsaved image is removed from the Image Manager, that image is unre-
coverable since there will no longer be any image data.