Grass Valley Kalypso User Manual V.15.0 - Manual (Page 406)

406 Kalypso — User Manual
Appendix A — Tutorials
5. Observing the program monitor, press the Cut button on the PGM PST
Transition subpanel ( Figure 274 ). The key will immediately be taken
out of the picture.
Figure 274. PGM PST Transition Subpanel, Keyer Transitions
6. Observing the program monitor, press the Key 1 Mix button on the
Transition subpanel ( Figure 274 ). The key will mix on the program
monitor, probably at a faster rate (the default is 7 frames). This is a
separate transition system for only that keyer.
7. Observing the program monitor, press the Key 1 Cut button. The key will
cut off the program monitor.
8. Now press the Transition subpanel Bkgd button and Key 1 button at the
same time( Figure 274 ). You have selected the background and one key
for the next transition. will be over on the preview
monitor.
9. Observing the program monitor, press the Auto Trans button. The
transition on the program monitor now includes a background mix to
as well as mixing on. Because this is a main transition, it
takes one second.
10. Press the Transition subpanel Key 1 , Key 2 , and Bkgd buttons at the same
time. You have now selected all three elements for the next transition,
but only one of the keyers is on the program monitor.
0618_02_112_r0
Transition
On On On On
Sec
Sec
Sec
Sec
Key Key
2
Key Key
3
Key Key
4
Key Key
1
Key Key
Prior
Prior
Bkgd Bkgd Triger Triger
Trans Trans
PVW
PVW
User User
2
User User
3
User User
1
Mix Mix Wipe Wipe
1
Wipe Wipe
2
Preset Preset
Black
Black
Auto Auto
Trans
Trans
Cut Cut
Key 2 Key 2
Mix
Mix
Key 3 Key 3
Mix
Mix
Key 4 Key 4
Mix
Mix
Key 1 Key 1
Mix
Mix
Key 3 Key 3
Cut
Cut
Key 2 Key 2
Cut
Cut
Key 4 Key 4
Cut
Cut
Key 1 Key 1
Cut
Cut
Auto
Trans
Transition
Lever Arm
Key 1
Cut
Key 1
Mix
Key 2
Mix
Key
1
Key
2
Bkgd
Cut
Mix
PGM PST
Transition
Subpanel