Grass Valley Kalypso User Manual V.15.0 - Manual (Page 166)

166 Kalypso — User Manual
Section 3 — System Operation
Eng Setups Save-Load Menu
The Eng Setups Save-Load menu is used to save and load Engineering
Setups information. Only this file format is supported in this menu. The
menu is accessed by touching
Eng Setups , Save Load ( Figure 136 ).
Figure 136. Eng Setup Save-Load Menu
The Eng Setups Save-Load menu is similar to the Daily Setups Save-Load
menu (
page 164 ) and operates in the same way, except there is only one
type of Engineering Setup file.
Set the desired parameters in the various Eng Setup menus, then name and
save the setup into a file in a destination folder.
CAUTION The Load button immediately replaces information the Kalypso system is cur-
rently using with the selected file information. When configuration files are
loaded, significant changes to Kalypso system operation are possible.
EIC Login
A login procedure is required before any changes to Eng Setups parameters
can be made. This restriction applies to loading Eng Setup configuration
files. Each login session has a pre-determined time-out. A separate security
feature can also be activated that requires entry of a password before Eng
Setups changes can be made.