Grass Valley Kalypso User Manual V.15.0 - Manual (Page 208)

208 Kalypso — User Manual
Section 3 — System Operation
4. Adjust the Hue , Saturation , and Brightness knobs to make the matte the
desired color. This adjusts the base fill color of the matte.
5. Press the Keyer Wipe button to select a wash matte type containing both
base fill and wash fill colors. The Keyer Wipe button illuminates to
indicated a wash has been selected (though the background matte is not
using the keyer wipe pattern generator). Note that pressing the
C1 Wipe
or C2 Wipe button also selects a wash matte type and illuminates the
Keyer Wipe button.
6. Press Wash Fill to delegate the Matte subpanel controls to the wash fill,
and adjust the Hue , Saturation , and Brightness knobs to create a contrasting
color. If only a single matte fill color is visible that doesn’t change,
adjust the
Offset and/or Softness knobs to make the edge between the
two colors visible on the screen, then adjust the wash fill color.
7. Adjust the Rotation knob to change the angle of the edge.
8. Adjust the Texture knob, to adjust the intensity of a pattern added to the
edge. (More texture controls are available in the Matte menu).
Matte Menu Controls
Most of the controls in the Matte menu duplicate the controls in the Mattes
subpanel.
1. Go to the Mattes menu by double pressing the Bkgd 1 or Bkgd 2 button in
the Mattes subpanel.
2. If not already selected, touch the Base Color data pad of the desired
Background (1 or 2). Use the top three soft knobs to adjust Hue ,
Saturation , and Brightness of the base fill color ( Figure 163 ).