Grass Valley Kalypso User Manual V.15.0 - Manual (Page 225)

Kalypso — User Manual 225
M/E Copy/Swap
M/E Copy/Swap
Copy and Swap functions are available for M/Es. With Copy and Swap
you can use the settings of one location at a different location in the system.
This can be useful if, for example, a effect has been set up on M/E 1 but it
needs to be placed on-air using M/E 2. You can quickly copy the M/E 1 set-
tings to M/E 2 and place it on-air, freeing M/E 1 for another purpose.
When an M/E copy or swap is performed, all the M/E settings are trans-
ferred. This includes the current source selections and all the settings for
wipes, keyers, and mattes.
You use the Copy/Swap subpanel to copy and swap M/E settings
(
Figure 173 ).
Figure 173. Copy Swap Subpanel
Pressing the M/E Copy or M/E Swap button initiates the copy or swap opera-
tion, but nothing actually changes until the operation is completed using
the delegation buttons in the Mattes subpanel.
0721_08_82_r1
M/E Modifiers
Mattes
Rotate
Wash Geometry
Base / Wash Fill
Hue
Texture
Saturation Brightness
Offset / Size / Clip Softness / Gain
Key
Only
Copy / Swap
Flat Flat C 2 C 2
Wipe
Wipe
C 1 C 1
Wipe
Wipe
Utility Utility
2
Utility Utility
1
Keyer Keyer
Wipe
Wipe
Base Base
Fill
Fill
M/E M/E
Swap
Swap
M/E M/E
Copy
Copy
Wipe Wipe
Swap
Swap
Keyer Keyer
Swap
Swap
Matte Matte
Swap
Swap
Wipe Wipe
Copy
Copy
Matte Matte
Copy
Copy
Keyer Keyer
Copy
Copy
Wash Wash
Fill
Fill
Undo Undo
Incl Incl
Wipes
Wipes Matte Matte
Fill
Fill
Color Color
Pick
Pick
Auto Auto
Deleg
Deleg
M/E M/E
1
M/E M/E
2
M/E M/E
3
Last Last
Deleg
Deleg
Key Key
1
Key Key
2
Key Key
3
Key Key
4
Bkgd Bkgd
1
Bkgd Bkgd
2
Wipe Wipe
1
Wipe Wipe
2
Matte Matte
Fill
Fill
Border Border
Line
Line
PstPtn PstPtn
Bord
Bord
Pgm Pgm
Pst
Pst
Util 2 Util 2
Fill
Fill
Util 1 Util 1
Fill
Fill
Copy Swap Subpanel
Inactive