Grass Valley Kalypso User Manual V.15.0 - Manual (Page 215)

Kalypso — User Manual 215
Chroma Key Operating Notes
Chroma Key Operating Notes
Introduction
The Kalypso system features chroma keyers with powerful controls. These
controls offer subtle adjustments to allow successful keying of difficult
subject matter (fine hair, smoke, translucent objects, etc.), and to overcome
some problems resulting from imperfect chroma key set coloring or
lighting. The Kalypso chroma key also has an Auto Setup feature that can
create an excellent chroma key under most circumstances without the need
for manual adjustment.
See Chroma Key on page 88 for background information that can help you
better understand the chroma key controls. The following information pro-
vides more detailed instructions on how to set up a chroma key using the
Auto Setup feature and use the manual controls in the Keyer menu.
Auto Setup
The first step of setting up most chroma keys is to use Auto Setup. Auto
Setup automates the first steps to achieving a chroma key. Auto Setup per-
forms the following:
• Calculates primary suppression Hue and Luminance.
• Sets primary suppression Selectivity and Chroma to defaults.
• Calculates Clip Low, and sets Clip Hi to default.
• Sets all the secondary suppression values to duplicate the primary sup-
pression values, but turns secondary suppression off.
• Changes Opacity temporarily to 100% to permit an accurate backing
color sample, and then returns it to its original setting.
• Sets Key Position and Size values to default (0).
Two different Auto Setup algorithms are available, one for well designed
and lighted sets (
Reshape off), and the other for more challenging sets
( Reshape on). Depending on individual circumstances, additional manual
adjustments may be required after you use Auto Setup.
After an Auto Setup has been initiated, you can cancel it by pressing the
Auto Setup button again, but the chroma key will retain the default settings
imposed.
To Chroma Key Using Auto Setup:
1. Press one of the Key 1-4 Transition buttons on an M/E to delegate the
keyer you wish to use.