Grass Valley Kalypso User Manual V.15.0 - Manual (Page 202)

202 Kalypso — User Manual
Section 3 — System Operation
E-MEM Prefs Menu
The Master E-MEM operating mode is selected on the E-MEM Prefs menu,
accessed via
Daily Setups , Suite Prefs , E-MEM Prefs ( Figure 158 ).
Figure 158. E-MEM Prefs Menu
300 Mode Operation
Use the following procedure to operate in Master E-MEM 300 Mode:
1. Select 300 Mode by going to the E-MEM Prefs menu (touch Daily Setup s,
Suite Prefs , E-MEM Prefs ) and touching 300 Mode . Alternatively, you can
recall a Suite Pref that was saved with this mode selected.
2. Setup the first keyframe on one of the M/Es, press the individual
M/E’s E-MEM
Learn button, then select the bank and register on that
subpanel to which you wish to save those settings.
3. If that effect will have multiple keyframes, delegate the Master E-MEM
subpanel to only that M/E and edit the effect using keyframe editing,
Inserting, Deleting, and Modifying keyframes as required.
4. Repeat Step 2 and Step 3 for all the effects you plan to use on that M/E.
5. Select a different M/E, and repeat the steps immediately above for all
the effects for that M/E. Continue until you have built all the effects on
all the M/Es you intend to use.