Grass Valley Kalypso User Manual V.15.0 - Manual (Page 172)

172 Kalypso — User Manual
Section 3 — System Operation
6. Enter the number of the first register into which you wish to load the
selected range of registers, then touch
Enter .
7. Touch the Load button.
The range of registers will be loaded to the specified registers beginning
with the register number shown in the Load To data pad.
Multi-Select Button
The Multi-select button ( Figure 143 ) is useful for copying, pasting, loading,
or saving multiple files from within the Select Reg(s) mode. When you select
the Multi-select mode:
• The double-click function is disabled.
• You cannot change directories until you deselect the Multiselect button.
Figure 143. Multiselect Button Allows Selection of Multiple Files
System Control Concept
Controlling changes to the Kalypso system is an important operating con-
cept. When the Kalypso system is on it is always outputting signals (though
they may be black). During actual system operation you are changing the
system from one state to another. This may be an abrupt change, or it may