Grass Valley Kalypso User Manual V.15.0 - Manual (Page 191)

Kalypso — User Manual 191
E-MEM Operations
Two different types of Modify All functions are available:
• Modify All Relative operations calculate a difference between the current
value at the time cursor position and the current work buffer value for
each changed parameter. This difference is applied to all the affected
key frames in the effect. For example, a hue change of 30 degrees will
shift different hues by that amount, and will not change them to the
same hue. This function is performed by double pressing the
Mod\MdAll
button in the Effects Edit subpanel of the Main panel.
• Modify All Absolute operations replace the current value of parameters
of all affected keyframes in the effect with the current value of each
changed parameter in the work buffer. For example, if a hue was
changed 30 degrees to make it red, different hues on other keyframes
will be changed to red, not shifted 30 degrees. Exact values, not differ-
ences, result. This function is performed by touching the
Mod All Absolute
button on the Timeline-Edit menu.
Mode changes are always absolute. Turning a function on turns it on for all
affected keyframes, and does not toggle on functions off.
To perform a Modify All operation:
1. Delegate for editing the levels in the effect you wish to be affected by
the modifications.
2. Move the time cursor to the location in the effect you wish to use as a
baseline for the operation.
3. Change the desired parameters by pressing a button, turning a knob, or
entering a value with the key pad.
4. Perform the desired relative or absolute modify operation:
• To make relative changes, double press the Mod/MdAll button in the
Effects Edit subpanel on the Main panel. The relative changes of the
modified parameters will be applied to all the affected keyframes in
the effect.
• To make absolute changes, access the Timeline-Edit menu by
touching
Timeline , Edit , then touch the Mod All Absolute button. The
absolute values of the modified parameters in the work buffer will
be applied to all the affected keyframes in the effect.