Grass Valley Kalypso User Manual V.15.0 - Manual (Page 179)

Kalypso — User Manual 179
E-MEM Operations
E-MEM Operations
Recalling Registers
The Kalypso system is optimized for rapid effects recall, generally accom-
plished with a single keystroke. To access a different bank, two keystrokes
may be required.
Note If recalling effects from the Master E-MEM subpanel with Auto Recall off,
you first need to specify which levels you wish to control with the Enable but-
tons.
To Recall A Register in the Same Bank
1. Press the E-MEM subpanel keypad number of the desired register.
To Recall A Register from a Different Bank
On an Individual E-MEM Subpanel:
1. Press the Bank X X button of the desired bank. Pressing this button once
selects the first numbered bank. Pressing the button twice rapidly
selects the second numbered bank.
2. Press the E-MEM subpanel keypad number of the desired register.
Alternatively, you can press the ↑ Bank button, press the keypad number of
the desired bank, then press the number of the register.
On the Master E-MEM Subpanel:
1. Press the Bank X button of the desired bank
2. Press the E-MEM subpanel keypad number of the desired register.
Alternatively, you can press the ↑ Bank button, press the keypad number of
the desired bank, then press the number of the register.
To Clear the Current Register
When you build an effect you may want to start with an empty register.
1. Press Get Eff , • , Enter .