Grass Valley Kalypso User Manual V.15.0 - Manual (Page 305)

Kalypso — User Manual 305
Store Menu
Figure 219. Still Store Create Edit Menu, Recording Controls
CAUTION Long duration recordings can uncache a lot of other Still Store material, and
saving long recordings can fill the cache with locked items, making other Still
Store material inaccessible.
3. Controls are also available to specify a partial raster fenced recording
and choose the placement (horizontal and vertical) of the area to be
captured. Single frame fenced recordings are possible to save storage
space.
Note The modifications listed above must be performed before
recording the clip.
4. If your source is not live, cue the source material. If you are using an
external device controlled by the Kalypso system (Profile VDR or VTR),
you can cue and play the material using the Kalypso Machine Control
subpanel.
5. To initiate the recording, touch the Record Clip button. If the source is not
live you also need to play the source material. The recording will
proceed for the specified duration, then stop (unless using continuous
record, in which case the recording will stop when out of frames).
6. Positioning, cropping, or a partial raster fencing of an image must be
done before a “Keep” is performed. Select the corresponding data pad
and specify the desired modifications.