Grass Valley Kalypso User Manual V.15.0 - Manual (Page 254)

254 Kalypso — User Manual
Section 3 — System Operation
available. Prompting in the lower left area of the panel indicates which step
should be performed next.
1. Press the Router Assign button on the Local Aux panel to enter Router
Assign Mode (the button blinks while in this mode). The source name
displays will change to show only the routed Kalypso sources, with
their current router source name. All other buttons and displays go
dark.
2. Choose a switcher source by pressing its source select button. The Shift
and Unshift buttons can be used to access additional switcher sources.
After selection, the source name displays will change to show the
names of the available router sources. The currently selected router
source will be backlit in red.
3. Select a router source for the chosen switcher source by pressing the
source select button displaying the name of the desired source. If there
are more router sources available, you can use the
Prev Page and
Next Page buttons to choose different groups of router sources to select
from. You can also directly choose a different group to select from on
the upper Aux Bus Delegation row (see below). After selecting a router
source, the system returns to
Step 2 and you can select another switcher
source to change.
4. When finished, press the Router Assign button on the Local Aux panel to
return it to normal operation.
Direct Router Group Selection
If there are many router sources available, paging through the list may take
more time than is available during a live production. Direct router group
selection provides faster access. When there are more than 32 or 24 Router
sources, they are alphabetically grouped and the first source in each group
is displayed on the upper source name displays on the Local Aux panel.
After activating Router Assign mode and selecting the switcher source you
wish to change, press the button on the upper bank for the appropriate
group. That entire group will immediately appear on the middle source
name displays, permitting quick selection.