Westermo RedFox Series - Manual (Page 957)

Westermo OS Management Guide
Version 4.17.0-0
Use ”show microlok” (from Global Configuration context) to list summary
information for configured MicroLok gateway instances. Use ”show” (within
the
Microlok Gateway Configuration context) to list detailed information on
a specific MicroLok gateway instance.
Default values Not applicable.
Example
example:/config/#> show microlok
Microlok II Gateway
ID
Enabled Serial Listen Port
===============================================================================
1 Enabled 1 60000
example:/config/#> microlok
example:/config/microlok-1/#> show
Microlok II gateway
Status
: Enabled
Listen : ANY port 60000
Key On Delay : Disabled
Key Off Delay : Disabled
Grant Delay : Disabled
Address Lookup Table (ALT):
--------------------------------------------------------------------------------
Addr
Remote Peer Serial Description Session Timeout (ms)
0010 N/A 1 siteA-ctrl3 Disabled
0020 192.168.3.3:60000 N/A siteB-ctrl1 Disabled
example:/config/microlok-1/#>
41.3.2 Setting Enable
Syntax [no] enable
Context Microlok Gateway Configuration context
Usage Use ”enable” to enable and ”no enable” to disable a MicroLok II gate-
way instance.
Use ”show enable” to show whether this gateway instance is enabled or
disabled.
Default values Enabled
➞ 2015 Westermo Teleindustri AB 957