Westermo RedFox Series - Manual (Page 933)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Exceptions Configures Modbus Exceptions. With Modbus Excep-
tions enabled, the Modbus Gateway will react upon and
respond to certain error conditions, e.g., if a Gateway
in client mode receives a (serial) Modbus message ad-
dressed to Modbus unit not found in its Map table. If
exception handling is desired, except for this particu-
lar situation, the gateway can be configured to ignore
exceptions for unknown units.
Modbus Server specific settings
Listen interface Configures the listen Interface and port.
Poll Interval Configures the Poll Interval
Inactivity Timeout Configures the Inactivity timer
Broadcast Delay Configures the Broadcast delay
Redirect Configures the Modbus Address redirection
Redirect Broadcast Enables/Disables redirect of Modbus broadcasts
Request Queue Enables/Disables the Request Queue
Configuration of Modbus Gateway in Client Mode
Modbus Client specific settings
Map table Configures the mapping of Modbus unit number to IP
address and TCP port number of Modbus/TCP slaves.
➞ 2015 Westermo Teleindustri AB 933