Westermo RedFox Series - Manual (Page 137)

Westermo OS Management Guide
Version 4.17.0-0
Example
example:/#> show iface
Press Ctrl-C or Q(uit) to quit viewer, Space for next page, for next line.
Interface Name Oper Address/Length MTU MAC/PtP Address
---------------- ---- ------------------ ----- ---------------------------
lo UP 127.0.0.1/8 16436 N/A
vlan1 UP 192.168.2.200/24 1500 00:07:7c:84:91:65
------------------------------------------------------------------------------
example:/#> boot
example:/boot/#> bootp
example:/boot/bootp/#> show mac
00:07:7c:84:91:65 (offset 1)
example:/boot/bootp/#>
7.3.8 Storage of BOOTP configuration file (VFS target)
Syntax [no] vfs-target
Context System Bootstrap BOOTP context
Usage Set virtual file system (VFS) target for configuration file.
Use this setting to save the retrieved file in a non-volatile location. By default
all configuration files retrieved over BOOTP are temporary, and will be lost
when rebooting the system, unless an operator saves a copy with an explicit
”copy running-config cfg://mybackup.cfg” or similar (e.g., Web ’Apply’
or SNMP Set).
Set to ”vfs-target flash” to automatically save to built-in flash (startup-
config) , or ”vfs-target usb” to save to an external USB stick.
Use ”no vfs-target” to disable the setting to get the default behaviour
where the file is stored in RAM only.
Use ”show vfs-target” to show the VFS target setting.
Default values Disabled (i.e., store in RAM only)
7.3.9 Manage Console Settings
Syntax [no] console
Context System Bootstrap context
➞ 2015 Westermo Teleindustri AB 137