Westermo RedFox Series - Manual (Page 155)

Westermo OS Management Guide
Version 4.17.0-0
Default values LLDP is enabled by default.
Example
example:/config/#> lldp
example:/config/lldp/#> enable
example:/config/lldp/#> show
LLDP is enabled
example:/config/lldp/#>
7.3.41 Show LLDP Status
Syntax show lldp
Context Admin Exec context.
Usage Show LLDP information about neighbouring devices.
Default values Not applicable.
Example
example:/#> show lldp
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
Interface:
Eth 10, via: LLDP, RID: 1, Time: 0 day, 01:32:31
Chassis:
ChassisID: mac 00:07:7c:84:d7:44
SysName: wolverine
SysDescr: Wolverine WeOS v4.9.x
MgmtIP: 192.168.2.2
Capability: Bridge, off
Capability: Router, on
Capability: Wlan, off
Port:
PortID: mac 00:07:7c:84:d7:47
PortDescr: 10/100TX Eth 2/1
VLAN: 1 vlan1
LLDP-MED:
Device Type: Network Connectivity Device
Capability: Capabilities
Capability: Policy
Capability: Location
Capability: MDI/PSE
Capability: MDI/PD
Capability: Inventory
-------------------------------------------------------------------------------
➞ 2015 Westermo Teleindustri AB 155