Westermo RedFox Series - Manual (Page 416)

Westermo OS Management Guide
Version 4.17.0-0
19.4.1 Interface Status
Menu path: Status ⇒ Interface
Name A unique identifier for the interface. Automatically generated from
VLAN/PPP/GRE/SSH identifier when the VLAN/PPP/GRE/SSH/ instance
is created. lo is the loopback interface. (PPP, GRE and SSH interfaces
are available for WeOS Extended.)
Enabled Shows whether the interface is enabled or disabled. A green check-
mark means the interface is enabled, and a dash means it is disabled.
Status The status of the interface, Up or Down.Text Owned is shown when
there is a PPPoE interface associated with the VLAN interface. The
owner is also displayed within parenthesis.
Distance The administrative distance value used for routes acquired on this in-
terface. Route selection is based on this number. A lower value indi-
cates a more preferred route.
Address
method The IPv4 address assignment method used for the interface: Static
means the IPv4 address is configured manually, Dynamic means the
address is acquired automatically via DHCP (for VLAN interfaces) or is
part of the PPP configuration (for PPP interfaces), and Disabled means
IPv4 address assignment is disabled on the interface.
Continued on next page
416 ➞ 2015 Westermo Teleindustri AB