Westermo RedFox Series - Manual (Page 503)

Westermo OS Management Guide
Version 4.17.0-0
22.3 Configuring DHCP Server Settings via the CLI
Command Default Section
Configure DHCP Server
[no] dhcp-server
Disabled Section 22.3.1
[no] enable Enabled Section 22.3.2
[no] ping-check Enabled Section 22.3.3
[no] server-port 67 Section 22.3.4
[no] client-port 68 Section 22.3.5
[no] server-address Disabled Section 22.3.6
[no] server-name Disabled Section 22.3.7
[no] file Disabled Section 22.3.8
[no] host [INDEX] 1 Section 22.3.9
[no] match | Section 22.3.10
clientid |
option82 [remote-id
] >
[no] address Disabled Section 22.3.11
[no] server-address Disabled Section 22.3.6
[no] server-name Disabled Section 22.3.7
[no] file Disabled Section 22.3.8
[no] subnet /24 Section 22.3.12
[no] netmask Section 22.3.13
[no] pool Auto 1 Section 22.3.14
[no] lease-time <120-5256000> 864000 Section 22.3.15
[no] gateway Empty 2 Section 22.3.16
[no] name-server [,] Empty 2 Section 22.3.17
[no] domain Disabled Section 22.3.18
[no] ntp-server Disabled Section 22.3.19
View DHCP Server Status
show dhcp-clients
Section 22.3.20
1 A pool may be created automatically. See Section 22.3.14 .
2 Empty values have special meaning here. See Section 22.3.16 and Section 22.3.17 .
➞ 2015 Westermo Teleindustri AB 503