Westermo RedFox Series - Manual (Page 917)

Westermo OS Management Guide
Version 4.17.0-0
Context seroip context
Usage Define maximum frame delay in milliseconds.
Use ”no frame-delay” to disable maximum delay checking in the packing
algorithm.
Default values 20 (milliseconds)
Error messages None defined yet.
39.3.6 Setting Frame Size
Syntax [no] frame-size <1-1460>
Context seroip context
Usage Define maximum frame size in bytes (this is part of the packing algo-
rithm).
Use ”no frame-size” to reset the maximum frame size to the default value.
Default values 1000 (bytes)
Error messages None defined yet.
39.3.7 Setting listen interface and port
Syntax [no] listen
Context seroip context
Usage Set local interface and (UDP/TCP) port to listen to.
Specify an interface to limit incoming traffic to the stated interface, or ”any”
to accept traffic via any interface.
Specify ”PORT” to configure a specific (TCP/UDP) port to listen to.
Use ”no listen” to accept traffic for (TCP/UDP) port 9000 on any interface.
Default values Any interface, (UDP/TCP) port 9000 (”no listen”)
Error messages None defined yet.
➞ 2015 Westermo Teleindustri AB 917