Westermo RedFox Series - Manual (Page 47)

Westermo OS Management Guide
Version 4.17.0-0
5.2 Accessing the command line interface
To login via the console port you need the username and password. Currently
there is only a single user account defined, the administrator user account. Fac-
tory default account and password:
❼ Login: admin
❼ Password: westermo
The same account is used for management via CLI and Web (see section 4 ). To
reset the administrator password to the default setting, see chapter 7 .
5.2.1 Accessing CLI via console port
For WeOS switches equipped with a console port, that port can be used to access
the CLI. (For information on which WeOS devices that have a console port, see
section 1.5.1 ).
Console cable
See the User Guide of your specific product ( section 1.5 ) for information on
what Diagnostic Cable to use when connecting to the console port of your
specific product.
Recommended Terminal Emulation programs:
❼ Win32: PuTTY, http://www.chiark.greenend.org.uk/~sgtatham/putty/
❼ UNIX: There are different terminal emulation programs for different Unix
dialects. On Linux minicom is recommended.
The following console port settings are used:
Data rate 115200 bits/s
Data bits 8
Stop bits 1
Parity None
Flow control None
The example in below shows how to login via the console port using the PuTTY ap-
plication. Once you have installed and started PuTTY, configure the appropriate
➞ 2015 Westermo Teleindustri AB 47