Westermo RedFox Series - Manual (Page 942)

Westermo OS Management Guide
Version 4.17.0-0
40.2.17 Managing Mapping of Modbus units to IP hosts
Syntax [no] unit address
Context modbus context (client mode only)
Usage Setup Modbus IP map.
Only applicable when configuring the Modbus Gateway in ”client” mode
(see
section 40.2.2 ).
Default values N/A
Error messages None defined yet.
40.2.18 Show Modbus Gateway Setting
Syntax show
Context modbus context
Usage Show Modbus Gateway Setting
Default value Not applicable.
40.2.19 Show Modbus Gateway Mode Setting
Syntax show mode
Context modbus context
Usage Show Modbus Gateway Mode Setting
Default value Not applicable.
40.2.20 Show Serial Port Setting
Syntax show port
Context modbus context
Usage Show Modbus Gateway Mode Setting
Default value Not applicable.
942 ➞ 2015 Westermo Teleindustri AB