Westermo RedFox Series - Manual (Page 555)

Westermo OS Management Guide
Version 4.17.0-0
24.3.2.1 Link Alarm Trigger Configuration Example
Syntax trigger link-alarm
Context Alarm Configuration context
Usage Create a link-alarm trigger, and enter the Alarm Trigger Configuration
context for this trigger.
Additional settings for link-alarm triggers are listed below. The only manda-
tory setting is the list of ports - no link-alarm alarm events will occur until
ports are defined.
❼ Port(s) (mandatory): Define the port or ports this link-alarm trigger is
associated with.
❼ Enable/Disable: By default, the trigger is enabled.
❼ Severity: By default, active severity is WARNING and inactive severity
is NOTIFY.
❼ Action: By default, the trigger is mapped to the default action profile
(action 1).
Example
example:/#> configure
example:/config/#> alarm
example:/config/alarm/#> trigger link-alarm
Created trigger 2
example:/config/alarm/trigger-2/#> port 1-2
example:/config/alarm/trigger-2/#> end
example:/config/alarm/#> show
Trigger
Type Enabled Action Source
==============================================
1 power YES 1 1 2
2 link-alarm YES 1 1 2
Action Targets
===============================================================================
1 snmp log led digout
===============================================================================
Summary alarm traps: Disabled
example:/config/alarm/#>
➞ 2015 Westermo Teleindustri AB 555