Westermo RedFox Series - Manual (Page 295)

Westermo OS Management Guide
Version 4.17.0-0
13.4.1 Managing MAC Forwarding Database Settings
Syntax fdb
Context Global Configuration context
Usage Use the ”fdb” command to enter the MAC Forwarding Databas context
(fdb).
Use ”show fdb” to show current FDB settings (list of configured MAC ad-
dress filters, and the configured aging timeout). Also available as ”show”
command within the
MAC Forwarding Databas .
Default values Not applicable.
13.4.2 Configure MAC Address Aging Timeout
Syntax [no] aging-timeout <0|1-3825>
Context MAC Forwarding Databas context (fdb)
Usage Set the aging timeout (in seconds) for unicast MAC addresses learnt dy-
namically. The configured aging timeout will only be an approximation of
the actual aging timeout. The value is first rounded upwards in steps of
15 seconds. The MAC entries will be purged from the forwarding database
within 1/7th of the resulting aging timeout.
Use ”no aging-timeout” or ”aging-timeout 0” to disable aging entirely.
Use ”show aging-timeout” to view the current setting.
Default values 300 (seconds)
13.4.3 Configure Static MAC Filter Entries
Syntax [no] mac port <[PORTS] [ALL] [CPU] | [NONE]>
Context MAC Forwarding Databas context (fdb)
Usage Add or delete a static MAC address filter. The ”MACADDRESS” is written as
a colon separated hexadecimal value, e.g., ”01:23:45:56:89:AB”.
The ”PORTLIST” states the port(s) where packets with the given (destina-
tion) MAC address are to be forwarded. As of WeOS v4.17.0, the static MAC
➞ 2015 Westermo Teleindustri AB 295