Westermo RedFox Series - Manual (Page 209)

Westermo OS Management Guide
Version 4.17.0-0
Furthermore, outbound traffic shaping in frames per second mode is not
availble on DSL ports. See also
sections 8.1.7 and 10.1.2 .
❼ Fall-back default-VID: The fall-back default VID setting is only of interest
for the special case when untagged packets are received over a link only
associated with tagged VLANs.
Ethernet settings for port speed/duplex mode, and MDI/MDIX mode do not apply
to SHDSL ports, thus are not configurable.
Note
As of WeOS v4.17.0, enabling/disabling flow control (as described in section
section 8.1.3 ) has no effect on SHDSL ports.
➞ 2015 Westermo Teleindustri AB 209