Westermo RedFox Series - Manual (Page 74)

Westermo OS Management Guide
Version 4.17.0-0
6.3 Manage SNMP Settings via the CLI
Command Default Section
SNMP Server Configuration
[no] snmp-server
Enabled Section 6.3.1
[no] rocommunity public Section 6.3.2
[no] rwcommunity Disabled Section 6.3.3
[no] trapcommunity trap Section 6.3.4
[no] host Disabled Section 6.3.5
[no] rouser Disabled Section 6.3.6
[auth
[crypto ]]
[OIDTREE]
[no] rwuser Disabled Section 6.3.7
[auth
[crypto ]]
[OIDTREE]
SNMP Server Status
show snmp-server
Section 6.3.8
6.3.1 Manage SNMP Server
Syntax [no] snmp-server
Context Global Configuration context.
Usage Enter SNMP Server Configuration context. If the SNMP server is disabled,
it will be enabled when issuing the ”snmp-server” command. Use ”no
snmp-server” to disable the SNMP server.
Use ”show snmp-server” to show all SNMP server settings. (Also available
as ”show” command within the snmp-server context.)
Default values Enabled.
74 ➞ 2015 Westermo Teleindustri AB