Westermo RedFox Series - Manual (Page 628)

Westermo OS Management Guide
Version 4.17.0-0
Default values Disabled
27.3.20 Configure OSPF Designated Router Priority
Syntax [no] priority <0-255>
Context Interface OSPF Configuration context
Usage Configure the OSPF designated router priority, which affects the chance
to become designated router on a broadcast network. A higher value in-
creases the chance to become designated router.
Use ”priority 0” to state that this router is not eligible as designated
router on this interface/”IP subnet”.
Use ”no priority” to return to the default setting.
Use ”show priority” to show the OSPF designated router election priority
setting for this interface.
Default values 1 (”priority 1”)
27.3.21 Show General OSPF Status
Syntax show ip ospf
Context Admin Exec context.
Usage Show general OSPF status information.
Default values Not applicable
27.3.22 Show OSPF Routes
Syntax show ip ospf route
Context Admin Exec context.
Usage Show the current least-cost routes learnt via OSPF. See also the com-
mand ”show ip route” ( section 19.7.25 ), which displays the full forward-
ing/routing table.
Default values Not applicable
628 ➞ 2015 Westermo Teleindustri AB