Westermo RedFox Series - Manual (Page 861)

Westermo OS Management Guide
Version 4.17.0-0
Usage Create, delete, or modify an SSL VPN tunnel. Use ”ssl ” to
create a new SSL tunnel, or to enter the configuration context of an existing
SSL tunnel. (To find the index of configured tunnels, use ”show tunnel” as
described in
section 35.3.1 ,)
Use ”no ssl ” to remove a specific SSL VPN tunnel, or ”no ssl”
to remove all configured SSL VPN tunnels.
Use ”show ssl ” to show all settings of a specific SSL tunnel (also
available as ”show” command within the
SSL VPN Configuration context).
Note
Tunnels which are not intended to be used should either be deleted or
disabled (
section 36.3.3 ).
Default values Not applicable.
36.3.2 Change tunnel mode (Server/Client)
Syntax [no] server
Context SSL VPN Configuration context
Usage Set the tunnel in server or client mode, use ”no server” for client mode.
Default values Server
36.3.3 Enable/disable a SSL VPN tunnel
Syntax [no] enable
Context SSL VPN Configuration context
Usage Enable or disable a SSL VPN tunnel. A disabled tunnel will be deactivated,
but keeps its configuration settings.
Use ”enable” to enable and ”no enable” to disable an SSL VPN tunnel.
Use ”show enable” to show whether this SSL VPN tunnel is enabled or dis-
abled.
➞ 2015 Westermo Teleindustri AB 861