Westermo RedFox Series - Manual (Page 619)

Westermo OS Management Guide
Version 4.17.0-0
Continued from previous page
Command Default Section
[no] hello-interval <1-65535> 10 Sec. 27.3.17
[no] dead-interval <1-65535> 40 Sec. 27.3.18
[no] auth Disabled Sec. 27.3.19
[no] priority <0-255> 1 Sec. 27.3.20
View OSPF Status
show ip ospf
Sec. 27.3.21
show ip ospf route Sec. 27.3.22
show ip ospf neighbor [] Sec. 27.3.23
show ip ospf database [asbr-summary|external| Sec. 27.3.24
network|router|summary>
show ip ospf database max-age Sec. 27.3.24
show ip ospf database self-originate Sec. 27.3.24
27.3.1 Activate OSPF and Manage General OSPF Settings
Syntax [no] ospf
Context Router Protocol Configuration context
Usage Enter the Router OSPF Configuration context, and activate OSPF with de-
fault settings if OSPF is not activated already. Instead of running ”ospf”
from the
Router Protocol Configuration context, you can use ”router ospf”
directly from the Global Configuration
Use ”no ospf” to disable OSPF and delete all existing OSPF configuration.
Use ”show ospf” to show a summary of all general OSPF settings. Also
available as ”show” command within the
Router OSPF Configuration context.
Default values Disabled (no ospf)
27.3.2 Configure OSPF Router-ID
Syntax [no] router-id
➞ 2015 Westermo Teleindustri AB 619