Westermo RedFox Series User Manual
Page 905
Westermo OS Management Guide
Version 4.17.0-0
will synchronize the connect sequence, and regularly verify the connection.
If an established connection can’t be verified the connection will be taken
down after a time specified by the timeout setting.
❼ Message settings: The OK, CONNECT, DISCONNECT and ERROR message
can be customised if desired. Both verbose and numeric value can be
changed.
❼ Map settings: To be able to dial, the phone number must be mapped to an
IP-address and port. ATD is equivalent with ATD0, mapping number 0 to an
IP-address allows for connecting with ATD without number. Up to 250 map
entries can be configured.
❼ User strings: If the serial equipment requires a specific answer to an ini-
tialisation string, user answer strings can be defined. The will not perform
any function except printing out the desired text. The answer can be with
line breaks, use backslash (’\’) as line break. The answer can be up to 64
characters long including line breaks.
➞ 2015 Westermo Teleindustri AB
905