Westermo RedFox Series - Manual (Page 163)

Westermo OS Management Guide
Version 4.17.0-0
Chapter 8
Ethernet Port Management
By default all ports on the switch are enabled. Section 8.1 provides general
information about the available port settings. Section 8.2 covers port settings via
the Web interface and section 8.3 port settings via the CLI.
8.1 Overview of Ethernet Port Management
The table below presents available port settings. The features are presented
further in the following sections.
Feature Web CLI General Description
Enable/disable port X X
Speed-duplex mode X X Section 8.1.2
Flow control X X Section 8.1.3
Port priority (level) X X Section 8.1.4
Port priority mode X X Section 8.1.4
Link alarm X X Section 8.1.5
Inbound rate limit X X Section 8.1.6
Rate Selection X X -”-
Traffic Selection X -”-
Outbound traffic shaping X X Section 8.1.7
MDI/MDIX X X Section 8.1.8
Fastlink (X) (X) Section 8.1.9
Continued on next page
➞ 2015 Westermo Teleindustri AB 163