Westermo RedFox Series - Manual (Page 440)

Westermo OS Management Guide
Version 4.17.0-0
19.7.18 Enable/Disable NTP Settings
Syntax [no] enable
Context NTP Configuration context
Usage Enable or disable configured NTP settings.
Use ”enable” to enable/activate configured NTP settings. Use ”no enable”
to disable/deactivate configured NTP settings (the settings are not removed,
only deactivated).
Use ”show enable” to show whether NTP settings are enabled or disabled.
Default values Enabled
19.7.19 Manage (remote) NTP Server(s)
Syntax [no] server
Context NTP Configuration context
Usage Add, delete, or manage a remote NTP server with specified IP Address
or domain name, to set the time on this unit. Up to 8 NTP servers can be
configured. With the ”server ” you enter the
NTP Remote
Server Configuration context for that specific NTP server.
If no (remote) NTP server is configured, the unit can acquire NTP server(s)
dynamically from an interface with DHCP address assignment.
Use ”no server ” to remove a specific NTP server, or ”no
server” to remove all configured NTP servers.
Use ”show server” to show settings for all configured NTP servers, or ”show
server ” to show NTP settings for a specific NTP server (also
available as ”show” command within the
NTP Remote Server Configuration
context).
Default values Not applicable
19.7.20 Enable/Disable (remote) NTP Server
Syntax [no] enable
440 ➞ 2015 Westermo Teleindustri AB