Westermo RedFox Series - Manual (Page 713)

Westermo OS Management Guide
Version 4.17.0-0
31.2.2.1 New NAT Rule - NAPT view
Active Rule is active if checked.
Type NAPT. If you change to 1-TO-1 NAT, the view will
change. See
section 31.2.2.2 .
Incoming Interface Optional. The interface connected to your subnet
whose addresses you want to translate (the inter-
face to your internal/private network).
Source Address(es) Optional. The IP address and subnet mask (CIDR)
identifying the IP subnet where this NAT rule should
be applied.
Destination
Interface Mandatory. The interface that should represent
all IP addresses on the subnet of the internal
interface.
This is the external/public interface,
typically the interface connected to the Internet.
Continued on next page
➞ 2015 Westermo Teleindustri AB 713